- High roundness grade 300 balls in a shop dispenser bottle - 1/4"--250/bottle - 1/8"--500/bottle - 3/16"--500/bottle - 5/16"--250/bottle - 5/32"--500/bottle - 7/32"--500/bottle
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
Jagwire's Cable Guide Stoppers are rubber adapters that fit over hydraulic brake lines so that the lines will fit into various open-type frame cable-housing stops and stay securely in place. You get a pack of 50.
- 8x1mm Allen head
M7 Shaft/M6 Head 48mm Long
- For chain and derailleur alignment - 20 per bag
• Designed to keep dust and dirt out of V-Brake cable/housing systems
- Aluminum w/lock nut - 18mm long/6mm O.D.
- Includes stock replacement retainers for headsets, bottom brackets and hubs - Headsets: (8) 5/32"x22, (8) 5/32"x16, (8) 3/16"x15, (24) 5/32"x20; - Bottom brackets: (12) 1/4"x9, (16) 5/16"x9, (16) 5/16"x10 - Hubs: (8) 3/16"x7, (16) 1/4"x7
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano,…
• Specially-formulated plastic liner prevents brittleness • SLR/M housing compatible • Plastic
- Compatible with KMC Half Link chains & Kool Knight chain - Provides More Strength - Card of 6 pcs
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
- PolyCarbonate headset spacers with the FSA logo - Variety of colors, sold in bags of 10
- Aluminum straddle cable carrier for cantilever brake
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool…
- Aluminum w/lock nut and mount - Slotted mount design
Bar end plugs (2)
- Compatible with Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Black Teflon cables are designed for ultra-low friction and corrosion-free shifts - Stainless steel and zinc galvanized steel cables are corrosion resistant
A must-have item for all your delicate department store bike repairs.
Greenfield's RetroKit is used to mount Greenfield kickstands (sold separately) on bicycles that require this special piece due to cables being in the way or an unusual frame design. If you have any questions about using the RetroKit, please contact us.
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver
The Slic-Kable features a low friction inner wire for smooth braking.
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
- Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free
- Sold in pairs. - Allen wrench included.
Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
- No metal compound in these pads - They won't be abrasive on your rims - Squeal-free compound